Control

The following equipment is in place to ensure products confirm to required specifications :

DIMENSIONAL MEASUREMENT LABORATORY :

  • 1 DEA three-dimensional coordinate measuring machine (CMM).
  • 1 ZEISS (Spectrum 700 (ST3/RDS-RST)) coordinate measuring machine (CMM).
  • 1 ZEISS randcom 54-SD TIMS Z=300 compl. Form tester.
  • 1 Axis (angles) checking device.
  • 2 Surface roughness control instrument.
  • 1 Digital and vernier profile projector.
  • 1 2D micro-hide.
  • 1 MAHR kontugraf.
  • 2 Coating (painting) thickness control instruments.
  • Calibration :
    - MV calibrator.
    - Gauge blocks.

METALLURGICAL & MATERIAL LABORATORY :

  • X-Ray Control Machine : 1 YXLON MU 2000/225 Radioscopic Inspection.
  • 2 spectral analysis equipment (spectrometers).
  • Wet method analysis equipment.
  • 2 LECO C-S instrument.
  • Brinell Hardness Testing Machines :
    - 4 STRUERS polishing device.
    - 3 Optical microscope.
    - 1 WOLPERT hardness determination device.
    - 1 Image analysis system.
    - 1 FOUNDRAX Brin200D automatic brinell hardness tester.
  • 16 various shrinkage tightness testing devices.
  • MAT-A check D2 ultrasonic test machine.
  • 1 TIEDE magnetic particle crack detector.
  • Micrel nodularity check machine (sonic nocularity test machine)
  • Endoscopic control unit
  • Tensile testing (max. 30 tons) machine
  • Eddy-current test machine
  • Microscopic examination Instruments
  • Non Destructive Testing line
  • ATAS thermal analysis System

SAND LABORATORY :

  • 2 Weighing scale.
  • 2 Standard ramming device.
  • 2 Green strength and tensile strength determination  device.
  • 2 Compactability determination device.
  • 2 Gas-permeability determination device.
  • 2 Water content determination device.
  • 1 Grain size (sieve analysis) determination device.
  • 1 Mouldability index determination device.
  • 1 Active clay determination(methylene blue test)device.
  • 1 Total (AFS) clay determination device.
  • 1 Ultrasonic mixer.
  • 1 Muller.
  • 2 Mould hardness determination instrument.
  • 2 Sand moisture control device.
  • 2 Wet tensile testing device.
  • Calibration and control set for sand testing equipment.

FITTINGS LABORATORY:

  • Leakage test apparatus.
  • Corrosion test set.
  • Hydraulic test device.